Sign In | Join Free | My himfr.com
Home > Rubber To Metal Adhesive >

One Component Bisphenol System Fluorogel Skeleton Oil Seal Adhesive

Shanghai Lorechem Company Limited
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now
    Buy cheap One Component Bisphenol System Fluorogel Skeleton Oil Seal Adhesive from wholesalers
     
    Buy cheap One Component Bisphenol System Fluorogel Skeleton Oil Seal Adhesive from wholesalers
    • Buy cheap One Component Bisphenol System Fluorogel Skeleton Oil Seal Adhesive from wholesalers

    One Component Bisphenol System Fluorogel Skeleton Oil Seal Adhesive

    Ask Lasest Price
    Brand Name : Thinkbond
    Model Number : 8
    Price : 1-99 usd
    Payment Terms : T/T
    Supply Ability : 20T/week
    Delivery Time : 5-15 working days
    • Product Details
    • Company Profile

    One Component Bisphenol System Fluorogel Skeleton Oil Seal Adhesive

    High Performance One Component Adhesive Rubber to Metal Bonding


    Application Field:


    ThinkBond 8 is a high-performance, one component adhesive for thermal vulcanization bonding between various rubber and metal and other hard substrates. Can applied to virous rubber to metal, rubber to fiber cords, fabrics such as cellulose, opolyamide, polyester and glass.

    Properties:


    State : liquid

    Shelf life: 12 months

    Suitable for NR/NBR/EPDM bonding

    Suitable for shock absorbing barrel, NBR+NBR joint docking, peroxide EPDM oil seal

    Can effectively improve the customer's production process, reduce the cost of adhesive use, increase production capacity, brush: xylene dilution 1 times the use. Dip coating: Use with xylene diluted 1.5 times.


    Application:


    Dilute the liquid 4 times with solvent, then dip the skeleton into the diluted adhesive.


    Applying Thinkbond:


    Agitation: We recommend stir Thinkbond 8 before the application to avoid settle down.
    Brushing: Application by brushing is normally undertaken without further dilution, but for coating large areas, dilution with MEK (or the diluent blend shown below) improves flow and speed of application.
    Spraying: We recommend an HVLP gun using 1.5 Bar air-pressure and a nozzle size of 1 -1.5mm. For this application we recommend diluting between 50 and 100% v/v.
    Roller coating: Dilute to 35 - 45 seconds on a DIN 4 or Ford 4 cup at 25 C for most roller application processes. Dilution with a high boiling solvent like MPA may be necessary to achieve the best finish and to reduce the skinning of the bonding agent in the applicator.
    Drying: Dry the film between 10 and 30 minutes at room temperature. If it is necessary to reduce drying time, we recommend to use forced air for 5 minutes at 100ºC maximum. Do not use in this stage temperatures above 100ºC to avoid adhesive pre-cure. After this process, follow to cure.
    Thickness of application layer:
    The film obtained by applying Thinkbond 942 is colorless.
    The layer thickness must be between 15 and 25 µm.
    For severe environments or dynamic fatigue applications, use ≧25 microns. Under these conditions it is possible to achieve bonds with no edge-failure after 400 hour salt-spray tests
    Parts with Thinkbond 942 already applied can be stored for 30 days prior to cure.

    Storage:
    Keep container tightly closed during storage and always keep away from heat sources. Store in an environment below 10ºC increases the shelf life of the adhesive.

    More Thinkbond adhesive :


    ApplicationSuitable codeDispersing mediumAdvantages
    Bonding agent for CPUThinkbond 42Solvent basedUniversal bonding agent for CPU; Easy to apply; High bonding activity, Less harm to health.
    Bonding agent for CPUThinkbond 46Solvent basedExcellent long-term pre-curing properties; Good resistance of cold and hot water; Cost-effective.
    Bonding agent for fluorine rubber & silicone rubberThinkbond 4SSolvent basedEnvironmentally friendly; Diluted with absolute ethanol; Universal applying and can be used for various skeletons.
    Bonding agent for fluorine rubber & silicone rubberThinkbond 3HSolvent basedEnvironmentally friendly; Diluted with absolute ethanol; Universal applying for various vulcanization systems fluorine rubber.

    One Component Bisphenol System Fluorogel Skeleton Oil Seal Adhesive


    Shanghai LoreChem Co., Ltd. was established in 2008. It is a high-tech enterprise which is dedicated to serve releasing products which involve semi-permanent release agent, anti-sticking, surface lubrication and thermal reactive adhesive. Shanghai LoreChem has been improving product quality for 15 years. The releasing products are mainly applied in rubber, polyurethane and composite industry. The brand of Lubekote for release agent and Thinkbond for adhesive have been registered in China. Both of them are well known in the industry.
    Shanghai LoreChem 's business is all over the domestic and foreign high-end production enterprises by providing professional technical solutions and services. The company's long-term goal is to become one of the best suppliers of release agent in Asia.

    Quality One Component Bisphenol System Fluorogel Skeleton Oil Seal Adhesive for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: Shanghai Lorechem Company Limited
    *Subject:
    *Message:
    Characters Remaining: (0/3000)