Home > Composite Release Agent >

Semi Permanent Composite Mold Release Agents 1 Gallon For Wind Power Blade

Product Categories

Shanghai Lorechem Company Limited

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Semi Permanent Composite Mold Release Agents 1 Gallon For Wind Power Blade

Name: Semi Permanent Composite Mold Release Agents 1 Gallon For Wind Power Blade
Brand: Lubekote
Price: 1 USD

Ask Lasest Price
Brand Name :	Lubekote
Model Number :	xxxxx
Price :	1-99 usd
Payment Terms :	T/T
Supply Ability :	20T/week
Delivery Time :	5-15 working days

Add to Cart

Product Details
Company Profile

Semi Permanent Composite Mold Release Agents 1 Gallon For Wind Power Blade

Semi-Permanent High Brightness Mold Release Agent for Wind Power Blade

Application Field:

It is a special release agent for wind power industry - semi-permanent, high brightness, no migration, mold cleaning, does not affect the secondary processing of products.

Application	Product	Advantages
Wind power blade	Lubekote 9023/9072/ 9071	semi-permanent, high brightness, no migration, mold cleaning, does not affect the secondary processing of the product
Blade mold/ engine room cover	Lubekote 9043, 9041, 9040	small odor, environmental protection, cost-effective, more demoulding times to reduce mold wear and tension

Advantages:

Easy to apply
Low odor
Minimum build up on mold
Excellent lubrication properties
Excellent stripping performance

Application:

The mold should be thoroughly cleaned.

Mold cleaning and release agent application should be performed in a well ventilated area.

1. Apply Lubekote release agent to clean, dry cotton cloth.

2. Gently wipe over mold surface covering an area of approximately 0,5 m². Vigorous rubbing or polishing is not required.

3. Repeat steps 1 and 2 on the adjacent area. Ensure a good overlap with the previous area to provide complete coverage

4. Repeat until mold is completely coated.

5. When dry, allow a further 15 minutes between coats for the film to cure.

6. Repeat Steps 1- 5 above for a further 3 coats (4 in total).

7. When dry, allow final film to cure for at least 30 minutes at room temperature before molding. Allowing a longer cure or heat curing (e.g. 15 min. at 60 °C) will improve film durability

Reapply one coat of Lubekote release agent in the same way as described above when release becomes hesitant.

Handling precautions:

For industrial use only.

Shanghai LoreChem Co., Ltd. was established in 2008. It is a high-tech enterprise which is dedicated to serve releasing products which involve semi-permanent release agent, anti-sticking, surface lubrication and thermal reactive adhesive. Shanghai LoreChem has been improving product quality for 15 years. The releasing products are mainly applied in rubber, polyurethane and composite industry. The brand of Lubekote for release agent and Thinkbond for adhesive have been registered in China. Both of them are well known in the industry.
Shanghai LoreChem 's business is all over the domestic and foreign high-end production enterprises by providing professional technical solutions and services. The company's long-term goal is to become one of the best suppliers of release agent in Asia.

Product Tags:


*From:	Your email address is incorrect!
*To:	Shanghai Lorechem Company Limited
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!